Wire Rod SAE1006/1008 FOB Bandar Abbas — Ultimate Guide 2025
Wire Rod SAE1006/1008 FOB Bandar Abbas is a frequent requirement for mesh, nails, drawing and cold‑heading lines sourcing Iranian wire rod with predictable paperwork and dispatch. This guide consolidates specifications, chemistry/mechanical windows, diameter and coil data, pricing drivers under FOB, logistics to UAE ports (Dubai, Jebel Ali), QA/MTC and a practical RFQ checklist so you can issue a clean request and compare offers. Many searches include the full phrase “Wire Rod SAE1006/1008 FOB Bandar Abbas Export Iran to UAE (Dubai, Jebel Ali)”; here you’ll validate scope before requesting quotes.
Explore related products and categories: Wire Rod • Steel Products • Raw Materials
Definition & Overview of Wire Rod SAE1006/1008 FOB Bandar Abbas
SAE1006/1008 wire rod is a low‑carbon hot‑rolled coil used for drawing and forming applications. Orders specify diameter, coil weight, chemistry caps, and mechanical targets aligned to downstream processing (drawing, galvanizing, cold heading).
For project bundles consider pairing with long and flat products: Rebar, I‑Beam & H‑Beam, U‑Channel, Angle, plates Hot Rolled Sheet and coated feedstock via Galvanized Sheet.
Specifications & Grades (SAE1006/1008)
Ranges below are indicative; confirm exact limits in RFQ and order. Tighter caps improve downstream yields and may add cost.
| Parameter | SAE1006 | SAE1008 | Diameter (mm) | Coil Weight (t) | Finish | Notes |
| Typical C % | ≤ 0.06–0.08 | ≤ 0.08–0.10 | 5.5–12 / 6–16 | 1.2–2.2 (typ.) | As‑rolled | Lower C eases drawing |
| Mn % | 0.25–0.45 | 0.35–0.60 | — | — | — | Mn for strength; balance for formability |
| P % (max) | ≤ 0.03 | ≤ 0.03 | — | — | — | Lower P improves ductility |
| S % (max) | ≤ 0.03 | ≤ 0.03 | — | — | — | Lower S for better toughness |
Mechanical Properties & Tolerances
| Property | Typical Range | Test Method | Notes |
| Tensile Strength (MPa) | 330–450 | Per order/MTC | Depends on chemistry & rolling |
| Elongation % | ≥ 25–30 | Per order/MTC | Gauge length per standard |
| Ovality/Tolerance | Per mill practice | — | Confirm for drawing lines |
Complement your program with tubulars/sections as needed: Hollow Section, Pipe, Round Bar & Flat Bar.
Applications / Market Use Cases
Wire drawing (low to medium reduction), nails, welded mesh, fasteners (with appropriate quality controls), galvanizing feedstock and cold‑formed parts. Define surface and scale control if galvanizing or coating is planned.
Pricing Drivers for Wire Rod SAE1006/1008 FOB Bandar Abbas (FOB Bandar Abbas)
| Driver | Impact | Notes |
| Billet/HR base & energy | High | Core cost basis |
| Chemistry caps & consistency | High | Tighter caps add value |
| Diameter mix & coil weight | Medium–High | Smaller diameters add complexity |
| Surface/scale control | Medium | For galvanizing/coating uses |
| Documentation & TPI scope | Low–Medium | Beyond MTC adds cost |
| Stowage & sailing window | High | Container vs break‑bulk; vessel timing |
Track upstream inputs under Raw Materials including Billet, modifiers Ferro Silicon and fuels Carbon Coke.
Logistics, Packaging & Delivery (FOB Bandar Abbas → UAE: Dubai, Jebel Ali)
Coils strapped and tagged for traceability; export coil weights typically 1.2–2.2 t. Loading by container or break‑bulk depending on volume and diameter mix. Coordinate vessel cut‑offs to align dispatch with Dubai/Jebel Ali schedules and terminal handling rules for steel coils.
Combine shipments with structural and flat products to optimize landed cost: I‑Beam & H‑Beam, U‑Channel, Angle, Hot Rolled Sheet.
Quality Assurance, MTC & Inspections
Each lot ships with MTC (chemistry and basic mechanicals), coil tags and bundle IDs; dimensional checks for diameter, ovality and coil weight. Third‑party inspection at mill/port available per contract.
For upstream casting/rolling context see Billet Grades and mill notes under Wire Rod Production.
Supplier Selection Tips
Prioritize exporters with stable rolling schedules, consistent chemistry and surface quality, and proven export packing. Trial parcels validate drawing/gavanizing performance before scale‑up.
Engage our export team via Contact Us and learn more About Us. Explore Wire Rod in the Steel Products catalog.
RFQ Checklist
- Confirm grades: SAE1006 and/or SAE1008; define chemistry caps (C/Mn/P/S).
- State diameters (e.g., 5.5–12 mm or 6–16 mm) and coil weights (e.g., 1.8–2.2 t).
- Define surface requirements (scale control) and any pickling/galvanizing plans.
- Incoterms: FOB Bandar Abbas (base); request CFR/CIF Dubai/Jebel Ali comparison if needed.
- Specify coil tagging/marking and moisture protection.
- Monthly/annual tonnage and dispatch calendar.
- QA scope and any third‑party inspection (TPI) at mill/port.
FAQ
Q: Can you quote FOB Bandar Abbas and CFR/CIF Dubai/Jebel Ali together?
A: Yes—parallel quotations help benchmark landed cost and schedules.
Q: Do you supply skin‑passed or scale‑controlled wire rod for galvanizing?
A: Yes—surface options are available; include in your RFQ.
Q: Can we mix diameters in one shipment?
A: Absolutely—mixed coils and split lots are common to optimize freight per ton.
Suggested Image / Infographic
High‑resolution yard photo of wire rod coils with tags and straps. alt=”Wire Rod SAE1006/1008 FOB Bandar Abbas”. Optional infographic: diameter vs coil weight matrix for quick planning.
Conclusion & CTA
Ready for an updated offer on Wire Rod SAE1006/1008 FOB Bandar Abbas? Share your diameter mix, coil weights, chemistry caps and monthly volume to receive a tailored quotation for UAE routes.
External References
- https://worldsteel.org
- https://www.fastmarkets.com
