Sponge Iron DRI CFR Mersin — Ultimate Strategy 2025
Sponge Iron DRI CFR Mersin is a frequent inquiry from EAF/IF steelmakers seeking reliable iron units from Iran with predictable paperwork. This guide centralizes specifications, metallization and carbon windows, sizing and reactivity, pricing drivers under CFR, logistics via Mersin into Iraq (Baghdad, Basra), QA/MTC and an actionable RFQ checklist—so you can issue a clean request and compare offers. Many buyers search the exact phrase “Sponge Iron (DRI) CFR Mersin Export Iran to Iraq (Baghdad, Basra)” and expect one page to validate scope before requesting quotes.
Explore related categories and upstream materials: Sponge Iron • Raw Materials • Steel Products
Definition & Overview of Sponge Iron DRI CFR Mersin
Direct Reduced Iron (DRI) provides a consistent metallic feed for electric arc and induction furnaces. Orders are governed by metallization level, carbon content, size class and gangue chemistry. Acceptance is by Mill/Test Certificate (MTC) and sampling protocols agreed at contract.
For a balanced melt shop program, pair DRI with upstream and downstream items like Billet, modifiers Ferro Silicon and fuels Carbon Coke, plus finished long products such as Rebar and Wire Rod.
Specifications & Classes (Metallization / Carbon / Size / Reactivity)
Typical export scope below is indicative—confirm exact windows at RFQ and order. Reactivity and handling differ between cold DRI (CDRI) and hot‑molded HBI briquettes.
| Type | Metallization % | Total Fe % | Carbon % | Size (mm) | Gangue (SiO2+Al2O3) % | Reactivity | Notes |
| DRI (lump/pellet) | ≥ 89–92 | ≥ 90 | 0.5–2.5 | 6–18 / 6–30 | ≤ 6.0 | Higher (careful handling) | Nitrogen inerting recommended |
| HBI (briquette) | ≥ 90–92 | ≥ 90 | 0.5–2.5 | 30×50×110 (typ.) | ≤ 6.0 | Lower (safer logistics) | Preferred for long haul |
Integrate with structural and flat products for project bundles: I‑Beam & H‑Beam, U‑Channel, Angle, plates Hot Rolled Sheet and coated Galvanized Sheet.
Applications / Market Use Cases
Primary iron unit for EAF/IF steelmaking, dilution of copper/tin in scrap blends, chemistry control, and production stability. In Iraq, programs often support rebar and section producers in Baghdad and Basra.
Pricing Drivers for Sponge Iron DRI CFR Mersin (CFR Mersin)
| Driver | Impact | Notes |
| Metallization & Total Fe | High | Higher metal content commands premium |
| Carbon window & size class | High | Higher C or briquetted forms add value |
| Gangue chemistry (SiO2+Al2O3) | Medium | Lower gangue improves melt yield |
| Packaging & inerting | Medium | HBI safer; CDRI needs careful handling |
| Freight & routing (CFR Mersin) | High | Vessel timing and onward trucking |
| Documentation & inspection scope | Low–Medium | Beyond MTC adds cost |
Track upstream markets under Raw Materials including Billet and modifiers like Ferro Silicon and fuels Carbon Coke.
Logistics, Packaging & Delivery (CFR Mersin → Iraq)
Shipments dispatch from Persian Gulf ports with discharge at Mersin, then overland routing toward Iraq. DRI/HBI is loaded in bulk or jumbo bags on pallets with moisture and reactivity controls. Coordinate trucking corridors and border formalities for deliveries to Baghdad and Basra; early booking aligns oven/DRI dispatch with vessel cut‑offs.
To optimize landed cost, combine DRI with structural/tubulars: Hollow Section, Pipe, U‑Channel, Angle.
Quality Assurance, MTC & Inspections
Each lot ships with MTC covering metallization, total Fe, carbon, size distribution and gangue chemistry. Independent surveyors can witness sampling, reactivity checks and moisture control at plant/port.
For casting/metallurgy notes see Billet Grades and process coverage under Wire Rod Production.
Supplier Selection Tips
Prioritize exporters with stable DRI/HBI programs, consistent metallization and export references on the Mersin→Iraq corridor. Trial lots validate furnace yield before annual commitments.
Engage our team via Contact Us and learn more About Us. Explore Sponge Iron inside Raw Materials.
RFQ Checklist
- Confirm type: DRI (cold) or HBI briquettes.
- State metallization %, total Fe %, carbon %, gangue limits (SiO2+Al2O3).
- Define size class and moisture/reactivity handling rules.
- Choose Incoterms: CFR Mersin (base); request CIF to named Iraqi entry points if required.
- Confirm packing (bulk vs jumbo bag on pallets), labeling and inerting.
- Specify monthly/annual tonnage and dispatch calendar.
- Set QA/TPI scope and sampling/acceptance procedures.
FAQ
Q: Can you quote CFR Mersin to Mersin and CIF to Iraqi entry points?
A: Yes—parallel quotes help compare landed costs and transit times.
Q: What is the safest form for long‑haul logistics—DRI or HBI?
A: HBI is generally safer with lower reactivity; DRI can be shipped with strict handling.
Q: Can we combine DRI/HBI with structural steel in one program?
A: Absolutely—bundling reduces freight per ton and synchronizes schedules.
Suggested Image / Infographic
High‑resolution photo: HBI briquettes on pallets, stretch‑wrapped with tags; or DRI handling at port. alt=”Sponge Iron DRI CFR Mersin”. Optional infographic: metallization vs yield chart for EAF/IF with indicative ranges.
Conclusion & CTA
Ready for today’s updated offer on Sponge Iron DRI CFR Mersin? Share your metallization/carbon windows, size class, packing and monthly tonnage to receive a tailored quotation for Iraq routes.
External References
- https://worldsteel.org
- https://www.fastmarkets.com
